Finishing Guide
All Panels
1. Sand faces and edges to 120.
2. Sand faces and edges to 180.
3. Chamfer edges approx 1mm (remove sharp corners).
4. Roll on a 1 coat of Osmo Oil Mix as below:
5. Buff off to make smooth.
Desktops, Tabletops, Worktops and Other Top Surfaces
1. Sand faces and edges to 120.
2. Sand faces and edges to 180.
3. Chamfer edges approx 1mm (remove sharp corners).
4. Roll on a 1 coat of Osmo Oil Mix as below:
5. Repeat Step 4
6. Buff off to make smooth.
